|Home » |
Creative ZEN Style M series 3-in-1 Style Pack
Just what you need for your Creative ZEN Style M Series
Take your ZEN Style M Series MP3 player* out for a spin, or better yet, accessorize it with this handy 3-in-1 Style Pack which consists of a high-quality Silicone Skin, Belt Clip and Keychain Clip. Custom-made for the ZEN Style M Series, they are designed to enhance your mobile music-listening experience. The silicone skin protects the player against knocks and scratches, while letting you enjoy easy access to all controls. Also, both belt and keychain clips provide you with more ways to take the player anywhere - simply clip it onto your bag or belt loop!
* Player not included.
|Average Customer Rating:
|| based on 11 reviews|
Average Customer Review:
( 11 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
15 of 15 found the following review helpful:
Needs better attention to detail.Jul 26, 2011
Purchased along with the Creative Labs M300 (16Gb). The silicone skin fits the unit but not a 100% alignment with the device, more like 98%.
A) The case is a bit to thick to have access to the power button. I'm finding that I have to slide back the top of the case to switch the power button to the "on" position. They have provided access to the microSD slot, however then again, I have to slide back the left side of the case to get to the door (not that big of a deal since not changing out the sd card that often. Access to the left/right button. This may be more of a design issue with the M300 more than the case, but since the case impacts this I thought I would mention it. I find myself having to push aside the left and right side edges to have "activate" the left/right buttons. There is this "nub" on the back of the case which you attach the belt clip or key ring attachment (to my disappointment, I was really hoping to attach both at the same time) which allows either the belt clip or the key ring, not both. With out either attached it just this large square block that seems to impact the "size" of having a small device. I understand that it needs to be there to attach the ring/clip to, it seems to take up more space than necessary. When ring/clip attached, there is a gap between the skin and the attachment, which seems to collect alot of debris. The alignment of the left side microphone is just a tad bit off, not sure of what the impact to the recording would be (not using the microphone).
B) Key ring. It's a metal ring, on a mini nylon belt with a quick snap attachment on the loop that attaches the plastic square base that attaches to the silicon case. I've had the quick snap fail once already. The metal ring has two rivets that stick out the side which rub up against the nylon belt. I can see with consistant use, the rivets will eventually rip through the nylon belt. I seriously recommend replacing the metal ring.
C) Belt clip. All plastic and does as it should, and has been fairly sturdy. I would have liked a "longer" version becuase tend to wear wider belts, but for a standard belt clip... it works good.
This is the first set of covers and accessories so I guess you have to start somewhere. The skin does it job of protecting the unit from bumps, and side scrapes, but does impact usability. Key ring doesn't look to have a long life span. Belt clip is effective.
Thanks for your attention,
2 of 2 found the following review helpful:
It could have been betterAug 07, 2012
By Richard N. Deliberty
I have a couple of problems with the style pack.
First, I have a minor problem with my bluetooth headset... (not Creative). I lose the connection if the player is hanging from my belt, so I want to use the clip. My clip broke after a couple of weeks. No clip - no use for the thing.
Second, the case itself is too thick. As has been mentioned in other reviews, you can't get to the on / off switch through the case. I either need to use a pen tip to dig in, or slide back the case.
I won't replace my broken clip. I'll do better with some velcro and a key chain.
1 of 1 found the following review helpful:
Overpriced but useful.Dec 31, 2012
By Sunshine Sill
By looking at previous reviews, I'm guessing that they redesigned this product slightly. Previous reviews mentioned that there was a problem accessing the power switch while the player was in the case. That is NOT the case with the one I received. There is no problem accessing any of the player's switches, jacks, etc. I bought this for the belt clip feature, and I really wish I could have gotten just that, for a lesser price. At $24.99 this seems quite over-priced since there is about $2 worth of materials here, but I guess when it's literally the only product available they can charge whatever they want.
Great CaseApr 02, 2013
By RD from St.Paul,MN
Perfect case for my Zen. Many options. can use it as a clip or key ring. very nice product. Happy with it
piece of crap. don't buy. waste of moneyMar 17, 2013
By art allard
the envelope fit ok but the 3rd piece can't be used. should have been included with instructions. what a waste
See all 11 customer reviews on Amazon.com